• <button id="76fys"><acronym id="76fys"></acronym></button>
    <nav id="76fys"></nav>

    <dd id="76fys"><track id="76fys"></track></dd>
  • <li id="76fys"><tr id="76fys"></tr></li>
    <span id="76fys"></span>
  • <tbody id="76fys"><p id="76fys"></p></tbody>
    若要找回密码,请联系产品中心客服人员
    电话:0571-0000000

    修改密码

    6-16位字符,包括英文字母、数字或符号 请再输入一次新登录密码
    确认

    产品中心

    公司拥有八大系列60多个品种的产品,生产的"金鼠"系列产品广泛应用于建筑、汽车、机械、电子、电器、太阳能光伏等行业,不仅在国内赢得了良好口碑,而且远销欧洲、北美、南美、东南亚、中东等地区,多个产品获得省、部级科技大奖,并多次列入国家火炬计划,技术创新计划,在市场上享有很高的知名度和美誉度。

    产品搜索 >
    返回产品列表
    • JS-8100双组分工业用密封胶

    • 组装行业AS(车灯/内饰/木工/电梯)
    咨询服务热线0571-82392027

    产品简介

    产品特性/Products Features

    本JS-8100双组分专用车灯胶为双组分、中性、快速固化硅酮密封胶。它具有下列优越的产品主特性:

    1.       固化后成韧的弹性体;

    2.       在-55℃至180℃范围内使用性能稳定;

    3.       无需使用底涂,可粘接多数材料如金属、塑料、陶瓷及玻璃;

    4.       施工方便,适合流水线作业生产;

    5.       推荐使用比例为8~12:1(重量比)。


    JS-8100 Two-component Silicone Sealant For Automotive Lamp is two-component, neutral, fast curing silicone sealant. It has the following main superior product characteristics:

    1.       Tough elastomers after curing;

    2.       Stable performance under the temperature range from –60 ℃ to 200 ℃

    3.      Good adhesion, bonding a variety of substrates without primer

    4.       Easy to process, suitable for line production.

    5.       The recommended ratio is (8 ~12):1 (weight ratio).

    产品用途/Applications

    主要适用于车灯的防水粘接密封,电子电器及通讯设备的粘接、防水密封以及其它高档灯具防水密封。因各材质的种类及表面处理方式不同,建议先进行适当和合理的粘附和物性确认后,才可上线使用。

    The waterproof adhesive and seal could be used for the automotive lights, the electrical and electronic and communications equipment and other high-grade lamps. Due to the different types of materials and surface treatment methods, it is suggested that proper and reasonable adhesion and physical properties should be confirmed before using.

    典型技术参数/Typical Technical Data

    blob.png

    操作及安全/ Operation and safety

    施工现场应具有良好的通风系统。

    JS-8100属双组分有机硅密封胶,请使用双组分密封胶的专业设备。若使用打胶设备混合比较不在推荐范围内,可能会影响胶体固化情况,如胶体固化过快将损坏胶机。

    表面处理:基材表面需干燥、清洁,去除应力、静电、灰尘、油污等。

    粘结:将胶体用胶枪挤到已清理干净的表面,使之分布均匀,如果温度较低,固化时间会延长。

    施胶后的部件请立即装配在一起,以便胶水达到良好润湿作用,这将有助于粘接效果。

    装配好部件如果存放的环境较干燥(相对湿度小于50%),建议增加湿度以保证合适的固化交联速度。

    Operation:

        The construction site should have a good ventilation system.

    JS-8100 is two component silicone sealant, please use two component sealant professional equipment. If the mixing ratio of glue beating equipment is not within the recommended range, it may affect the gel curing condition, eg: gel curing too fast will damage the glue machine.

    Surface treatment:the surface of the substrate needs to be dry and clean, so as to remove stress, static electricity, dust and oil pollution.

        Bonding:The sealant is squeezed onto the cleaned surface by glue gun to make it distribute evenly. If the temperature is low, the curing time will be prolonged.

    The components after using sealant should be immediately assembled so that the glue reaches a good wetting effect, which will lead a good bonding.

    If the assembly parts are dry (relative humidity is less than 50%), it is recommended to increase the humidity to ensure curing speed.


    --即开即用,请勿长时间暴露于空气中。

     

    --保持物料先进先出使用。

     

    --在通风良好的场所使用。

     

    --工作场所请勿进食。

    warning:

    The product should not expose to the air for a long time.

    Keep the material advanced first out.

    Processing under good ventilation condition

    Do not eat in the workplace.

    颜色及包装/Color and Package

     A:240或24kg/桶、B:19kg/桶

    Packing:A:5 gallon bucket or 55 gallon bucket.

                    B:5 gallon bucket

    储存及有效期/Storage& Shelf life

    推荐贮存温度:存放于通风良好干燥的地方,保存环境温度低于30℃。

     

    保质期:12个月                         

    Recommended storage temperature:Store in a well ventilated and dry place and keep the ambient temperature below 30 ℃.

    Shelf life:12 months


    危险指示/安全建议/运输规则:

    如长期的或重复的接触,要戴防护手套。

    远离热源/火花/明火。禁止吸烟。保持容器密闭。使用防爆的电气/通风/照明设备。

    按照非危险品运输。

    Safety advice:

    Wear protective gloves if you need a long or repeated contact.

    Keep away from heat. No Smoking. Keep the container closed.

    Transport according to non-dangerous goods regulations.

    危险指示、安全建议、运输规则/Safety advice

    B组分可造成皮肤轻微刺激??赡茉斐善し艄舴从?。造成严重眼刺激。

    远离热源/火花/明火。紧张吸烟。保持容器密闭。使用防爆的电气/通风/照明设备。

    按照非危险品运输。

    Component B can cause slight skin irritation. It may cause skin allergy or severe eye irritation.

    Keep away from heat. No Smoking. Keep the container closed.

    Transport according to non-dangerous goods.

    六九影院